Pyle PLG6C Component Speaker System 6.5 in
- 6.5 inch mid-bass drivers, 0.5 inch tweeters
- 400 watts maximum output
- 4 ohm impedance
- 1.3 to 22 kHz tweeter response
- Passive crossovers, grills and wiring kit
- Flush or surface angle mounting
- 3.23 x 6.85 x 3.23 inches, 5 pounds
Last refreshed Sep 7, 2026 · Based on the Amazon listing and published specifications, not hands-on testing.
A two-way component speaker kit with mid-bass drivers, silk dome tweeters, passive crossovers and installation hardware for upgrading a factory system. The spec table contradicts itself on Bluetooth and frequency response.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0007LCLPEModel: PLG6CCategory: Car Component Speakers
Sizes Available
Need a different one? Pick on Amazon →
Overview
A butyl rubber surround lets each mid-bass cone move on an electroplated plastic basket driven by a magnet structure, while a silk dome tweeter handles the high end. Crossovers, grills and a wiring kit complete the set.
Separate tweeters and mid-bass drivers with passive crossovers split the signal between two drivers, and the kit adds grills, wiring and hardware. The tweeters offer three mounting options, which helps placement. The limitation is data quality, because Bluetooth, remote and range entries do not belong on a wired component set and the frequency response is quoted two ways.
Who it's for
A car owner replacing worn factory speakers with a wired kit and willing to run wiring. Look elsewhere for plug-and-play wireless units, or if exact cutout depth matters, since only overall dimensions are given.
Pros and cons
- Separate tweeters and mid-bass drivers
- Passive crossovers included
- Wiring kit and hardware included
- Three tweeter mounting options
- Spec table lists Bluetooth for a wired set
- Frequency response quoted inconsistently
- Mounting depth not detailed
- Continuous power rating unstated
Performance notes
Crossovers send low and mid frequencies to the mid-bass driver and highs to the tweeter, which reduces strain on either driver outside its range. The stated maximum power is a ceiling, and real loudness depends on the head unit or amplifier driving the pair. Tweeter placement changes how the sound is imaged, which the three mounting options allow.
Specifications
| Brand | Pyle |
|---|---|
| Model | PLG6C |
| Dimensions & fit | |
| Speaker Size | 6.5 inches |
| Tweeter Diameter | 0.5 inches |
| Item Dimensions D x W x H | 3.23 x 6.85 x 3.23 inches |
| Item weight | 5 pounds |
| Capacity & performance | |
| Speaker Maximum Output Power | 400 watts |
| Construction & materials | |
| Color | Yellow |
| Compatibility & installation | |
| Mounting Type | Flush Mount, Surface Angle Mount |
| Connectivity Technology | Wired |
| Included components | |
| Included | Pair of mid-bass speakers, pair of tweeters, pair of passive crossovers, wiring kit, grills, installation hardware |
| Other details | |
| Impedance | 4 ohm |
| Speaker Type | Component, 2-way |
| Frequency Response | 1.3 to 22 kHz |
Closest rivals on specs
Focal 165 AS Access Component Speakers 6.5 in- Item Weight 5 vs 3.53 pounds (+42%)
- Speaker Maximum Output Power 400 vs 120 watts (+233%)
PRV Audio 6MR250B-4 Slim Midrange Bullet Speakers 6.5 in- Item Weight 5 vs 8.3 pounds (-40%)
- Speaker Maximum Output Power 400 vs 250 watts (+60%)
Grtsky MX65P1 Midrange Speakers 6.5 in- Item Weight 5 vs 4.19 pounds (+19%)
- Speaker Maximum Output Power 400 vs 100 watts (+300%)
Frequently asked questions
How much room does the Pyle PLG6C need?
The listing gives overall dimensions of 3.23 x 6.85 x 3.23 inches for depth, width and height and a weight of 5 pounds. It does not give a cutout or mounting depth.
Are the Pyle PLG6C speakers Bluetooth?
The spec table mentions Bluetooth and a remote, but the product is described as a wired component set with a wiring kit. Treat the Bluetooth entries as errors unless the seller confirms.
What is in the Pyle PLG6C kit?
The description lists one pair of 6.5 inch mid-bass speakers, one pair of 0.5 inch tweeters, one pair of passive crossovers, a wiring kit, grills and installation hardware.
What frequency range do the Pyle PLG6C tweeters cover?
The description gives a tweeter response from 1.3 to 22 kHz, while the spec table shows 5 KHz. The two do not match.