E-Z Ancor 25310 Twist-N-Lock Drywall Anchors 50 Count
- 50 anchors in the pack
- #8 x 1-1/4 inch size
- 75 pounds maximum shear strength
- Self-drilling, no pre-drilling
- Phillips drive, bugle head
Last refreshed Sep 7, 2026 · Based on the Amazon listing and published specifications, not hands-on testing.
A fifty pack of self-drilling drywall anchors that screw straight into the wall without a pilot hole. The listed load is a shear figure, so heavy hanging needs a proper check.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B000BQYFW2Model: 25310Category: Drywall Anchors
Overview
E-Z Ancor makes this Twist-N-Lock anchor to screw directly into drywall with a Phillips driver. A bugle head and a fully threaded, right hand thread bite into the board, and the point style is Type G.
No drilling and a bulk pack make quick work of hanging many items around a room. The limit is capacity: the listing gives a shear figure but no pull-out rating, so keep to light loads.
Who it's for
Renters, remodelers and installers hanging light items on drywall without pre-drilling. Heavy loads call for studs or a rated toggle bolt.
Pros and cons
- Self-drilling, no pilot hole
- Fifty in the pack
- Pull-out rating not listed
- Light loads only
- Contents wording is confusing
Performance notes
The anchor's point cuts its own hole and the threads hold the drywall in compression, so no pilot hole is needed. The shear strength figure describes sideways load, which is not the same as pulling straight out. Hanging weight, wall condition and driver speed all affect hold.
Specifications
| Brand | E-Z Ancor |
|---|---|
| Model | 25310 |
| Dimensions & fit | |
| Size Name | #8 x 1-1/4 inches |
| Item weight | 2.4 ounces |
| Compatible Groove Diameter | 0.25 inches |
| Fastener Size | 1.5 inches |
| Item Diameter | 3.75 inches |
| Item Dimensions | 6.25 x 0.82 x 0.51 inches |
| Thread Size | #75 |
| Construction & materials | |
| Material Type | Steel |
| Finish Types | Uncoated plain steel |
| Color | No Color |
| Included components | |
| Number Of Pieces | 50 |
| Included Components | Anchors^Concrete Screws and Bolt |
| Warranty & support | |
| Warranty Description | Warranty |
| Other details | |
| Maximum Shear Strength | 75 pounds |
| Thread Type | Unified National Coarse |
| Thread Style | Right hand, fully threaded |
| Screw Point Style | Type G |
| Head Type | Bugle |
| Drive System | Phillips |
| Fastener Type | Self-Drilling Screws |
| Grade Rating | Premium |
Closest rivals on specs
KURUI Plastic Self-Drilling Drywall Anchor Kit 140 Pcs- Compatible Groove Diameter 0.2 vs 0.5 inches (-60%)
- Item Weight 0.15 vs 0.54 pounds (-72%)
Feaoxyo Self-Drilling Drywall Anchors with Screws 100 Piece- Compatible Groove Diameter 0.2 vs 0.5 inches (-60%)
- Item Weight 0.15 vs 0.55 pounds (-73%)
Hillman Borefast Drywall Anchors 75 Pack- Item Weight 0.15 vs 0.75 pounds (-80%)
Frequently asked questions
Can I reuse the E-Z Ancor 25310 anchors after removing them?
The listing gives no reuse guidance. It says to screw directly into drywall, so removal and reuse are not covered.
Do the E-Z Ancor 25310 anchors need a pilot hole?
No. The listing says no pre-drilling is necessary.
What can the E-Z Ancor 25310 hold?
The listing names light fixtures, bathroom accessories and picture frames, with a maximum shear strength of 75 pounds.
What screwdriver fits the E-Z Ancor 25310?
The listing gives a Phillips drive.