SUNEX 2302 Impact Adapter 1/2 to 3/4 Inch
- 1/2 inch female square drive
- 3/4 inch male impact end
- Alloy steel, 4.25 inches long
- 5.6 ounces
- Tapered square end, single piece
Last refreshed Aug 4, 2026 · Based on the Amazon listing and published specifications, not hands-on testing.
An impact socket adapter that steps a half inch drive tool up to three quarter inch sockets, made from alloy steel. It is an adapter only, so no sockets or tools are included.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B000LQDB4AModel: SUN2302Category: Wrenches
Overview
A buyer with a half inch impact wrench and three quarter inch sockets needs a bridge between the two. This single square shank adapter has a tapered square end, with a female socket on the wrench side and a male end for the larger socket.
Stepping up a drive size lets one impact wrench work with larger sockets. The limit is torque, because the adapter transmits power but cannot turn a small tool into a larger one.
Who it's for
Shops and garages that mix drive sizes on lug nuts and larger fasteners. A buyer needing to go from three quarter to half inch should look at a reducer instead.
Pros and cons
- Alloy steel construction
- Square shank design
- Step up only
- Torque rating not listed
- Single adapter only
- Finish not specified
Performance notes
The female end accepts the wrench drive and the male end seats into the larger socket, passing torque straight through. Impact rated alloy steel handles the hammering. A larger socket does not add torque, and the wrench output stays the limit.
Specifications
| Brand | SUNEX |
|---|---|
| Model | SUN2302 |
| Dimensions & fit | |
| Item Length | 4.25 incheslower than 76% of 338 wrenches |
| Item weight | 5.6 ounces |
| Construction & materials | |
| Material Type | Alloy steel |
| Finish Types | Metal |
| Compatibility & installation | |
| Bit Compatibilities | 1/2 inch drive, 3/4 inch male impact |
| Included components | |
| Number Of Pieces | 1 |
| Warranty & support | |
| Manufacturer Warranty Description | Manufacturer warranty |
| Other details | |
| Drive System | 1/2 inch square drive |
| Drive End Style | Square shank |
| Bit Tip Configuration | Tapered square end |
| Bit Set Composition | Single Bit |
Closest rivals on specs
Frequently asked questions
How do I use the Sunex adapter?
The 1/2 inch female end goes onto a 1/2 inch drive tool, and the 3/4 inch male end fits a 3/4 inch socket.
Can the Sunex step a 3/4 inch drive down to 1/2 inch?
No. It is a female 1/2 inch to male 3/4 inch step-up adapter.
What is the Sunex made of?
The listing gives alloy steel.
What is in the box with the Sunex?
The listing names the impact socket adapter only.