MagVent MV-90 Magnetic Dryer Vent Coupling
- 90 degree venting for side wall, floor or ceiling exits
- Magnetic coupling self-aligns and attaches
- 12 inch UL 2158A transition hose pre-attached
- Accommodates a 3 inch offset
- Wall body, dryer union, bracket and anchors included
Updated 23 days ago · Based on the Amazon listing and published specifications, not hands-on testing.
A magnetic right-angle dryer vent coupling for awkward exits. Check your exit direction before ordering, since it suits specific vent routes.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B013TI7A4SModel: MV-90
Overview
Not a straight hose connection, this coupling turns the vent a quarter turn using a wall-side body and a dryer-side union joined by strong magnets. The magnets self-align and attach the hose to the exit vent.
The selling point is a rigid-pipe-friendly setup that handles awkward exits and a modest offset with a short hose. Where it falls short is that it is an installer part, and the listing gives no dryer model fit chart.
Who it's for
New and existing construction where the vent pipe leaves at an angle is the intended use. Anyone who just needs a short flexible hookup can use a simpler duct kit.
Pros and cons
- Magnets self-align the connection
- Short transition hose included
- Handles a center-to-center offset
- Works with awkward vent exits
- Installer part, no model fit chart
Performance notes
The magnets pull the dryer side to the wall side and align them, which saves wrestling with a clamp-only hose. A shorter run of hose to rigid pipe is the design aim, and the short hose carries the UL approval listed in the specs.
Specifications
| Brand | MagVent |
|---|---|
| Model | MV-90 |
Frequently asked questions
What comes with the MagVent MV-90?
One wall side body, one dryer side union with 12 inches of pre-attached transition hose, one mounting bracket and one wall anchor pack.
How much offset can it handle?
The description says up to a 3 inch offset center to center.
Does it fit a side wall exit?
Yes. The description lists side wall, floor or ceiling exits, in new and existing construction.