VONETS VAP11G-300 WiFi Bridge and Repeater
- N300 class, 300 Mbps on 2.4 GHz
- Single band, 2.4 GHz only
- Wi-Fi to Ethernet bridge, repeater and point to point
- RJ45 wired connection
- Range of 100 meters listed
- DC or USB powered
- 60 g, 0.83 x 1.85 x 3.62 inches
Last refreshed Sep 23, 2026 · Based on the Amazon listing and published specifications, not hands-on testing.
A small bridge that gives a wired-only device such as a printer or IP camera a wireless link. It does not act as a router and only uses one band.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B014SK2H6WModel: VAP11G-300Category: WiFi Range Extenders
Colors Available
Need a different one? Pick on Amazon →
Overview
An equipment shelf with a wired-only printer, camera or controller is the place this bridge serves. The unit joins an existing Wi-Fi network and hands a connection to the device over an RJ45 cable, and it can repeat the signal or run point to point.
Turning Ethernet-only gear into a wireless client is its job, which suits PLCs, medical devices and network equipment named in the title. The limit is a single slow band and thin listing detail, with no description text and no setup steps provided.
Who it's for
Technicians and home users who need a wired device to join Wi-Fi will use the bridge modes. People who need a primary router, many wired ports or the faster band should shop for a different device, since this one lists a single connector.
Pros and cons
- Converts wired devices to wireless
- Powered by DC or USB
- Small light body
- Bridge, repeater and point to point
- Single band only
- One wired connector
- No description text from the seller
- Setup method not described
Performance notes
The bridge connects as a Wi-Fi client to the router and passes traffic out its RJ45 jack, so the speed ceiling is set by the single wireless band and by signal strength at its location. The listed range figure is an open-air number, and walls reduce it.
Specifications
| Brand | Vonets |
|---|---|
| Model | VAP11G-300 |
| Dimensions & fit | |
| Item weight | 60 g |
| Item Dimensions D x W x H | 0.83 x 1.85 x 3.62 inches |
| Capacity & performance | |
| Range | 100 meters |
| Compatibility & installation | |
| Compatible Devices | Router |
| Included components | |
| Included components | RJ45 Ethernet cable, USB/DC cable |
| Warranty & support | |
| Frequency Bands Supported | 2.4GHz |
| Warranty Description | 1 year |
| Other details | |
| Data Transfer Rate | 300 Mbps |
| Wireless Compability | 2.4 GHz radio frequency |
| Connector Type | RJ45 |
| Frequency Band Class | Single-band |
| Special Features | Ethernet to WiFi, WiFi extender, WiFi signal cover, WiFi to Ethernet, wired to wireless, wireless to wired |
Closest rivals on specs
TP-Link RE220 Dual Band WiFi Extender- Data Transfer Rate 300 vs 733 Mbps (-59%)
Linksys RE6300 AC750 WiFi Extender- Data Transfer Rate 300 vs 750 Mbps (-60%)
TP-Link RE205 AC750 WiFi Range Extender- Data Transfer Rate 300 vs 750 Mbps (-60%)
Frequently asked questions
Is the Vonets VAP11G-300 a router?
No. The compatible device is a router, and the features describe Wi-Fi to Ethernet conversion, repeating and point to point use. It adds wireless to a wired device and does not replace the router.
What devices can I connect to the Vonets VAP11G-300?
The title names PLC, IP camera, printer, medical devices and network devices that use a wired connection.
How is the Vonets VAP11G-300 powered?
The title says DC or USB powered, and the included media lists a USB/DC cable.
Does the Vonets VAP11G-300 support 5 GHz?
No. Only 2.4 GHz is listed, at 300 Mbps.