ARES SKU-#70606 Impact
- Impact
- Manual
- 2.07 pounds
- More reviewed than 77%
A manual impact driver earns its keep as a backup tool for freeing seized fasteners, not as a replacement for a cordless driver in daily use.
As an Amazon Associate, ProductDome may earn a commission from qualifying purchases made through links on this page.
How it ranks among the 284 impacts we track
4.6★ across 1,100 Amazon ratings, Bayesian-smoothed toward the category average.
1,100 Amazon ratings, weighted on a log scale so huge counts don't drown everything.
Modest tracked demand last month.
Brand identity, imagery, description and spec coverage.
The ProductDome score is separate from the Amazon rating shown above: it combines the Bayesian-smoothed Amazon rating with evidence volume, tracked demand, and data quality across the 284 impacts we track - how the scorecard works · full impacts data report. Confidence: medium - useful but incomplete evidence.Last refreshed Aug 4, 2026. Data-computed, not a hands-on test. Compiled by the ProductDome Research Team.
Overview
The ARES 70606 is a manual impact driver built to break loose stuck or corroded fasteners using hammer strikes rather than a motor or battery. At roughly 2 pounds, it fits in a mechanic's tool roll alongside sockets and drivers.
Impact drivers built for hand use trade speed for control: a mechanic lines up the bit, strikes the handle with a hammer, and the tool converts that blow into rotational torque on a stubborn screw or bolt. Because it needs no charge and no outlet, it stays useful on jobs where a cordless driver has died or power is not available. Spec data for this listing is thin beyond weight and power source, so buyers should confirm bit size and drive size against their own sockets before ordering.
- Manual power source, no charging
- About 939 grams (2 pounds)
- Category built for stuck fasteners
- Toolbox-sized footprint
Who it's for
Suited to mechanics and DIYers who occasionally meet a rusted or over-torqued screw that a hand driver cannot budge. Less useful as a primary driver for routine fastening, since it depends on a hammer strike rather than continuous rotation.
Strengths and trade-offs
Drawn from this product's published specifications.
- Works without battery or cord
- Compact, toolbox-friendly weight
- Needs a hammer to operate
- No listed bit or drive size
Performance notes
Manual impact drivers work by converting a downward hammer blow into a short, sharp rotational pulse at the bit, which can break the grip of rust or thread-locker that a standard screwdriver cannot overcome. There is no motor, so output depends entirely on how hard the tool is struck and how squarely the bit seats in the screw head.
Specifications
| Brand | ARES |
|---|---|
| Model | SKU-#70606 |
| Power Source | Manual |
| Item Weight | 2.07 pounds |
How it compares
This product against the closest alternatives we track in impacts.
| Product | Amazon rating | Ratings | ProductDome score |
|---|---|---|---|
| ARES SKU-#70606 ImpactThis product | 4.6 / 5 | 1,100 | 3.7 / 5 |
| DEWALT DCF845B ImpactDeWALT | 4.7 / 5 | 12,700 | 4.5 / 5 |
| Milwaukee 2457-20 ImpactMILWAUKEE | 4.6 / 5 | 8,078 | 4.5 / 5 |
| GEARWRENCH 81270 ImpactGEARWRENCH | 4.7 / 5 | 4,983 | 4.4 / 5 |
| AOBEN AB7331T ImpactAOBEN | 4.4 / 5 | 10,707 | 4.4 / 5 |
Similar impacts from other brands
Questions about the ARES SKU-#70606
Common buyer questions answered straight from the product spec data - no fluff, no "it depends".
Does the ARES 70606 need a battery?
No. It is a manual impact driver, powered by striking the handle with a hammer rather than electricity or a battery.
How much does the ARES 70606 weigh?
Listed at 939 grams, or a bit over 2 pounds, light enough for a tool roll or toolbox drawer.
What is a manual impact driver used for?
It is meant for breaking loose fasteners that are rusted, over-torqued, or otherwise stuck, using a hammer strike instead of motor power.