Ansoon Metal Self-Drilling Drywall Anchor Kit 50 Pcs
- 25 anchors plus 25 screws, 50 pieces
- 75 lbs listed load, maker's claim
- #8 x 1-1/4 inch screws
- Carbon steel, zinc plated
- Self-drill point, bugle head, Phillips drive
Last refreshed Sep 7, 2026 · Based on the Amazon listing and published specifications, not hands-on testing.
A kit of zinc-plated self-drilling drywall anchors with matching screws, aimed at hanging items without a pilot hole. The listed load figure is the maker's own claim, not a tested pull-out rating.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B07CVT1N4MModel: ASANCHOR50Category: Drywall Anchors
Overview
Driving straight into drywall with a Phillips bit is how these Ansoon anchors install, using a deep thread and a self-drill point. The kit pairs each metal anchor with a screw, and the body is carbon steel with a zinc plating.
The reason to buy is the pairing of anchors and screws in one box, so nothing needs to be matched. The limitation is that several listed dimensions look off, and the load rating is stated as a hold figure without a test method.
Who it's for
A home project with a stud-free drywall wall and a cordless driver suits the kit. Heavy items such as large cabinets or TV mounts should go on studs or heavier anchors.
Pros and cons
- Anchors and screws together
- No pilot hole
- Carbon steel body
- Load rating method not stated
- Some dimensions look wrong
- Bulk pack for small jobs
Performance notes
A self-drilling tip cuts its own hole, then a deep thread grabs the gypsum core. Holding power depends on the wall thickness and on pulling straight out versus down. Zinc plating slows rust, which helps in a humid room.
Specifications
| Brand | Ansoon |
|---|---|
| Model | ASANCHOR50 |
| Dimensions & fit | |
| Fastener Size | #8 x 1-1/4 inch |
| Compatible Groove Diameter | 8 centimeters |
| Item Diameter | 3.18 millimeters |
| Item Dimensions | 3.15 x 0.71 x 5.91 inches |
| Capacity & performance | |
| Listed load | Up to 75 lbs |
| Construction & materials | |
| Material Type | Carbon steel |
| Color | Silver |
| Finish Types | Zinc plated |
| Included components | |
| Number of Pieces | 50 (25 anchors, 25 screws) |
| Unit Count | 50 Count |
| Other details | |
| Fastener Type | Self-drilling |
| Drive System | Phillips |
| Screw Head Style | Bugle |
| Screw Point Style | Self-drill |
| Thread Type | Deep thread, fully threaded |
| Set Name | Ansoon 50-Piece Zinc Drywall Anchors and Screws Kit |
| Thread Class | Standard |
Closest rivals on specs
KURUI Plastic Self-Drilling Drywall Anchor Kit 140 Pcs- Compatible Groove Diameter 3.1 vs 0.5 inches (+520%)
- Item Diameter 0.1 vs 0.5 inches (-80%)
CONFAST Zinc Self-Drilling Drywall Anchor Kit 200 Pcs- Compatible Groove Diameter 3.1 vs 0.4 inches (+675%)
- Item Diameter 0.1 vs 0.4 inches (-75%)
KURUI Toggle Bolt Hollow Drywall Anchor Kit 28 Pcs- Compatible Groove Diameter 3.1 vs 0.2 inches (+1450%)
- Item Diameter 0.1 vs 0.2 inches (-50%)
Frequently asked questions
Does the Ansoon anchor kit work in plaster or concrete?
The listing describes drywall anchors and gives no masonry rating. Use it in drywall only.
What screws come with the Ansoon kit?
Twenty-five #8 x 1-1/4 inch screws, one for each anchor.
How much weight do the Ansoon anchors hold?
The listing names a load limit but no test method, so allow a margin and use studs for heavy items.