Metabo NP35A Nailer
- Nailer
- 2 pounds
- Better rated than 81%
- More reviewed than 92%
A lightweight pin nailer suited to delicate trim and molding work, not a general purpose framing or finish nailer.
As an Amazon Associate, ProductDome may earn a commission from qualifying purchases made through links on this page.
How it ranks among the 177 nailers we track
4.7★ across 1,800 Amazon ratings, Bayesian-smoothed toward the category average.
1,800 Amazon ratings, weighted on a log scale so huge counts don't drown everything.
500+ bought on Amazon last month.
Brand identity, imagery, description and spec coverage.
The ProductDome score is separate from the Amazon rating shown above: it combines the Bayesian-smoothed Amazon rating with evidence volume, tracked demand, and data quality across the 177 nailers we track - how the scorecard works · full nailers data report. Confidence: medium - useful but incomplete evidence.Last refreshed Aug 4, 2026. Data-computed, not a hands-on test. Compiled by the ProductDome Research Team.
Overview
The Metabo NP35A is a 2 pound nailer built into Metabo HPT's pin nailer line, used for attaching thin trim and molding without leaving a visible hole. Its light weight makes it easy to control one-handed on finish work.
Pin nailers like the NP35A drive a very thin, often headless pin, which is why finish carpenters reach for them on delicate trim where a standard finish nailer would leave too large a mark. At only 2 pounds, it is built for extended overhead or one-handed use rather than heavy fastening. This listing does not specify air pressure requirements or magazine capacity, so those should be confirmed on the current product page.
- 2 pound tool weight
- Pin nailer for thin trim and molding
- Pneumatic, requires a compressor
- Part of Metabo's HPT nailer line
Who it's for
Suits finish carpenters and cabinet makers attaching thin trim, molding, or veneer where a small fastener and minimal hole are needed. Not a substitute for a framing or finish nailer on structural or larger trim work.
Strengths and trade-offs
Drawn from this product's published specifications.
- Light 2 pound weight for extended use
- Suited to delicate trim with minimal hole marks
- Metabo HPT build quality on the pin nailer line
- Requires an air compressor to operate
- Not built for structural or heavy fastening work
Performance notes
Pin nailers work by driving a thin pin fastener that leaves a nearly invisible hole, which is the main reason they're chosen for delicate finish work over standard finish nailers. Being pneumatic, it needs a compressor and air line to operate, and the 2 pound weight keeps fatigue down during long stretches of overhead or precision work.
Specifications
| Brand | Metabo |
|---|---|
| Model | NP35A |
| Item Weight | 2 pounds |
Other Metabo nailers
How it compares
This product against the closest alternatives we track in nailers.
| Product | Amazon rating | Ratings | ProductDome score |
|---|---|---|---|
| Metabo NP35A NailerThis product | 4.7 / 5 | 1,800 | 4.2 / 5 |
| DEWALT DWFP12231 NailerDeWalt | 4.7 / 5 | 5,003 | 4.4 / 5 |
| BOSTITCH BTFP12233 NailerBOSTITCH | 4.8 / 5 | 2,616 | 4.4 / 5 |
| Bielmeier BCSG-4 NailerBielmeier | 4.3 / 5 | 3,991 | 4.3 / 5 |
| Arrow T50 Heavy Duty Staple Gun KitArrow | 4.6 / 5 | 1,526 | 4.4 / 5 |
Similar nailers from other brands
Questions about the Metabo NP35A
Common buyer questions answered straight from the product spec data - no fluff, no "it depends".
What is the Metabo NP35A used for?
It's a pin nailer, used for attaching thin trim, molding, or veneer with a minimal fastener hole.
Does the NP35A need an air compressor?
Yes, it's a pneumatic nailer and requires a compressor and air line to run.
How much does it weigh?
About 2 pounds.