SUNLU PLA Plus Filament 1.75mm 1 kg
- 1.75 mm white PLA Plus, 1 kg spool
- +/- 0.02 mm dimensional accuracy
- 210 to 235 degrees C nozzle temperature
- 55 to 65 degrees C bed temperature
- 8.00 inch spool, 2.50 inches wide, 2.20 inch hub hole
- Almost all 1.75 mm FDM printers supported, Ender 3 named
Last refreshed Sep 7, 2026 · Based on the Amazon listing and published specifications, not hands-on testing.
A white PLA Plus filament on a neatly wound spool, with print temperatures and spool dimensions given. It is for FDM printers that take the common diameter, not resin machines.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B08CVG79JMCategory: 3D Printing Filament
Colors Available
Need a different one? Pick on Amazon →
Overview
A hobby workshop with an FDM printer is where this Sunlu PLA Plus spool earns its place. The maker describes it as a stronger, brighter PLA that is neatly wound to avoid knots and winding trouble.
The reason to buy it is the full set of print settings and the tight diameter tolerance, plus spool dimensions stated for checking against a printer holder. The limitation is that the strength claim comes from the maker, and no tensile figures are listed.
Who it's for
Hobbyists and students printing prototypes, models and household parts on common FDM printers have the settings they need in the listing. Resin printer owners, and users whose machines take another filament diameter, cannot use it.
Pros and cons
- Nozzle and bed settings provided
- Tight diameter tolerance
- Neatly wound spool
- Spool dimensions listed for holder fit
- Strength claim lacks supporting figures
- Fits FDM only, not resin
- White only in this listing
Performance notes
A tight diameter tolerance lets the extruder feed at a consistent rate, and neat winding lowers the chance of a tangle stopping a print mid-job. The nozzle and bed temperature ranges given set the window for good layer adhesion, and the bed range helps limit warping on the first layer. Spool dimensions decide whether it hangs on a printer's holder.
Specifications
| Brand | Sunlu |
|---|---|
| Dimensions & fit | |
| Item Diameter | 1.75 mm |
| Diameter tolerance | +/- 0.02 mm |
| Net weight | 1 kg |
| Spool diameter | 8.00 inches |
| Spool width | 2.50 inches |
| Spool hub hole diameter | 2.20 inches |
| Capacity & performance | |
| Nozzle temperature | 210 to 235 degrees C (410 to 455 degrees F) |
| Bed temperature | 55 to 65 degrees C (131 to 149 degrees F) |
| Construction & materials | |
| Material Type | PLA Plus |
| Color | White |
| Compatibility & installation | |
| Compatibility | Almost all 1.75 mm FDM printers, such as Ender 3 and Ender 3V2 |
Frequently asked questions
Is Sunlu PLA Plus suitable for resin or non-FDM printers?
No. It is 1.75 mm filament for FDM 3D printers. The listing mentions resin only as a separate Sunlu product line.
What temperatures does Sunlu PLA Plus need?
The maker recommends a nozzle temperature of 210 to 235 degrees C and a bed temperature of 55 to 65 degrees C.
Will the Sunlu PLA Plus spool hang on my printer?
The spool is 8.00 inches in diameter and 2.50 inches wide, with a 2.20 inch hub hole. The maker says it suits hanging on many 3D printers.