Metabo HPT NV45AB2 Roofing Nailer with Air Hose
- 16 degree wire coil roofing nails
- 7/8 to 1-3/4 inch nail length
- Side loading magazine
- 100 foot air hose in the style
- Brass couplers, 6-ball bearing design
- 300 psi or below listed pressure
Last refreshed Aug 4, 2026 · Based on the Amazon listing and published specifications, not hands-on testing.
A coil roofing nailer for asphalt shingles and insulation boards, sold with an air hose and a side loading magazine. The listing does not give weight, magazine capacity or a working pressure range.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B08JVG9KHDModel: NV45AB2Category: Nailers
Overview
Metabo HPT builds this air-powered roofing nailer for asphalt roofing shingles and insulation boards. A side loading magazine takes wire coil roofing nails, and an air hose comes with it.
Side loading makes reloads quick on a roof, and brass couplers with a standard ball bearing design are listed for longer coupler life. Without a stated magazine capacity or weight, handling over a full day is unknown. It needs an air compressor, which the listing does not include.
Who it's for
Roofers and home builders laying asphalt shingles or insulation boards with wire coil nails get a purpose-built nailer. Anyone driving other fasteners, or without compressed air, should pass.
Pros and cons
- Side loading magazine
- Brass couplers with ball bearings
- Air hose included
- Accepts a range of nail lengths
- Magazine capacity and weight not listed
- Needs a separate air compressor
- Wire coil roofing nails only
Performance notes
Air pressure drives the nail, so depth of set depends on the compressor setting and hose supply, and the listing states only a ceiling. Coil nails feed from the side magazine, and the accepted length range sets which shingle layers and board thicknesses it can fasten.
Specifications
| Brand | Metabo HPT |
|---|---|
| Model | NV45AB2 |
| Dimensions & fit | |
| Nail length | 7/8 to 1-3/4 inches |
| Included components | |
| Item Package Quantity | 1 |
| Other details | |
| Fastener Type | 16 degree wire coil roofing nails |
| Magazine | Side loading |
| Style | With 100 ft Air Hose |
| Pattern | Roofing Nailer |
| Couplers | Brass, standard 6-ball bearing design |
| Maximum Pressure | At or below 300 psi |
Frequently asked questions
How do I look after the couplers on the Metabo HPT NV45AB2?
The listing says the brass couplers have a 6-ball bearing design for longer coupler life. Oiling and maintenance steps are not given, so follow the manual.
Does the Metabo HPT NV45AB2 come with a compressor?
No. The style lists the nailer with a 100 foot air hose only.