Hougen HMD900 Magnetic Drill
- 1.5 inch drilling capacity in metal
- 850 watts, 9 A, 115 volts
- 450 rpm maximum speed, 2 speeds
- 27 pounds
- 3 feed handles, safety chain, hex wrench
Last refreshed Aug 4, 2026 · Based on the Amazon listing and published specifications, not hands-on testing.
High drilling capacity and two speeds in a corded unit that clamps to steel. The included list is a run of part numbers, and the listing never names a cutter or an arbor.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B09L7FH7J9Model: HMD900Category: Drills
Overview
A fabrication shop or steel job site gets a corded magnetic drill that clamps to metal with its base and feeds a cutter with handles. A safety chain and feed handles come with it.
Magnetic drills let you drill large holes in steel on site without a drill press, and the listing says lightweight for its class. Cutters are not included, and the item list needs a parts diagram to read.
Who it's for
Fabricators and ironworkers who drill steel in place get a corded unit with two speeds. A homeowner, or anyone who needs a cutter in the box, should look at other drills.
Pros and cons
- High drilling capacity in metal
- Safety chain included
- Three feed handles
- Cutters not shown as included
- Included list is only part numbers
- Heavy to lift into position
Performance notes
A magnetic base clamps the drill to steel, so the pull of the magnet and a clean flat surface decide how stable the cut is. Speed range and motor power set the size of hole and how fast it cuts. Feed pressure comes from the handles.
Specifications
| Brand | Hougen |
|---|---|
| Model | HMD900 |
| Dimensions & fit | |
| Maximum Chuck Size | 1.5 inches |
| Item Dimensions L X W X H | 11"L x 6.75"W x 15"H |
| Item weight | 27 pounds |
| Capacity & performance | |
| Maximum Rotational Speed | 450 rpmlower than 95% of 129 drills |
| Drilling Capacity Metal | 1.5 incheshigher than 88% of 125 drills |
| Number Of Speeds | 2 |
| Power & efficiency | |
| Power Source | Corded Electric |
| Maximum Power | 850 wattshigher than 66% of 129 drills |
| Amperage | 9 A |
| Voltage | 115 voltshigher than 81% of 233 drills |
| Construction & materials | |
| Color | Multicolor |
| Included components | |
| Included Components | HMD900, 3 feed handles, 3 feed handle knobs, 2 set screws for cutter installation, safety chain, 7/32" hex wrench |
| Unit Count | 1 Count |
| Other details | |
| Additional Features | Lightweight |
| Drill Type | Basic Drill |
Closest rivals on specs
Makita HR4013C SDS-Max AVT Rotary Hammer- Maximum Power 850 vs 350 watts (+143%)
- Voltage 115 vs 100 volts (+15%)
Frequently asked questions
Is the Hougen HMD900 a handheld drill?
No. It is a magnetic drill that weighs 27 pounds, and the listing does not describe handheld use.
Does the Hougen HMD900 include a cutter?
The included list names set screws for cutter installation but no cutter or arbor.
Can the Hougen HMD900 drill wood?
The listing gives a wood capacity, but the product is a magnetic drill meant for metal.