AZ4U W10876600 Washer Drain Pump
- Unit Count: 1.44 pounds
- Item Weight: 1.61 pounds
- Voltage: 120 volts
- Item Dimensions L x W x H: 8 × 6 × 4 inches
Last refreshed Jun 15, 2026 · Based on the Amazon listing and published specifications, not hands-on testing.
The standard fix for a Whirlpool or Maytag top-loader that will not drain, at a fraction of the dealer price. Confirm your model number appears on the list, then it is a short job.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0BWQKZHB7Model: W10876600Category: Washer Drain Pumps
Overview
This AZ4U part is an aftermarket washer drain pump, not an appliance. It replaces Whirlpool numbers W10876600, W10727777, W10876600VP, AP6004933, PS11738156, 4455877 and B25-3A04, and runs on 120V, 60Hz at 1.2A.
The parts to check before buying are simple: this fits top-loading washers from Whirlpool, Maytag, Kenmore and Crosley, covering Cabrio and Bravos XL families and a long list of MVW and WTW model numbers such as MVWB765FW0, MVWC565FW0, WTW8500DW1 and WTW7300DW1. Front loaders use a different pump entirely. Match your model tag against the listed numbers rather than going by brand alone.
- Replaces W10876600 and W10727777
- 120V, 60Hz, 1.2A operation
- Fits Whirlpool Cabrio and Maytag Bravos XL
- Single pump per package
Who it's for
For anyone whose top-loader shows a drain fault, leaves standing water in the tub, drains slowly or has grown loud during the spin cycle. If your machine is a front loader, or your model is not on the compatibility list, this is the wrong part.
Pros and cons
- Fixes DRN drain codes on top-loaders
- Covers a long list of MVW and WTW models
- Far cheaper than an OEM pump or a service call
- Two hoses and three screws to swap
- Top-loading washers only
- Aftermarket part, not factory branded
- Support window limited to 90 days
Performance notes
Replacement is two hose clamps and three screws on most of these machines, done after cutting power and water. Before fitting the new pump, check the old one for a trapped coin, sock or clothing tag, since a jammed impeller produces the same drain fault as a dead motor and tells you whether the pump was really the cause. A clogged drain hose will also mimic the symptom.
Specifications
| Brand | AZ4U |
|---|---|
| Model | W10876600 |
| Unit Count | 1.44 pounds |
| Item Weight | 1.61 pounds |
| Voltage | 120 volts |
| Item Dimensions L x W x H | 8 × 6 × 4 inches |
| Product Style | Above Ground |
Closest rivals on specs
Compare all side by side
Frequently asked questions
Which washers does the AZ4U W10876600 drain pump fit?
Top-loading Whirlpool, Maytag, Kenmore and Crosley machines, including many MVW and WTW models such as MVWB765FW0, MVWC565FW0, WTW8500DW1 and WTW7300DW1. Check your model tag against the full list before ordering.
Will this pump clear a DRN error code?
It addresses drain errors caused by a failed pump, and owners report exactly that fix. First rule out a clogged drain hose or an object jamming the old impeller, since both produce the same code.
What original part numbers does it replace?
W10876600, W10876600VP, W10727777, AP6004933, PS11738156, 4455877 and B25-3A04.