VEVOR Mini Metal Lathe 8x14 in
- 8 x 14 inch mini metal lathe
- 650 W, 110 V motor, 2250 RPM
- Variable speed, metal gears
- 3-jaw chuck, 3.9 inch capacity
- MT2 thread size, adjustable tailstock
- Cast iron, emergency button
Last refreshed Aug 4, 2026 · Based on the Amazon listing and published specifications, not hands-on testing.
A benchtop mini lathe for small metal turning with variable speed, metal gears and an emergency stop. Swing and bed length are given only loosely, so verify capacity against your parts.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0D5CV478MCategory: Metalworking Tools
Overview
Turning small metal parts on a workbench is the job of this VEVOR mini lathe, which spins the work in a three-jaw chuck while a cutter shapes it. A cast iron build, an adjustable tailstock and metal gears round out the machine.
Cast iron construction, a stop button and a full accessory set with cutters and spare gears make it a ready starter for hobby metalwork. Documentation is thin: swing and travel are not defined, and the motor is modest.
Who it's for
Hobbyists and model makers who turn small metal parts on a bench get a starter lathe with spare gears and cutters. Machinists needing precision documentation or heavy cuts should look at a larger lathe.
Pros and cons
- Variable speed control
- Cast iron construction
- Emergency stop button
- Spare gears and cutters included
- Modest motor power
- Swing and travel not defined
- Bench mounting not described
Performance notes
Speed changes with the variable control, and slower speeds suit larger diameters while faster speeds suit small parts. A cast iron body adds rigidity so cuts stay accurate. The tailstock supports long work, and the metal gears drive the feed.
Specifications
| Brand | Vevor |
|---|---|
| Dimensions & fit | |
| Thread Size | MT2 |
| Capacity & performance | |
| Maximum Rotational Speed | 2250 RPM |
| Capacity | 8 x 14 inches |
| Speed control | Variable |
| Chuck capacity | 3.9 inches |
| Power & efficiency | |
| Motor Power | 650 W, 110 V |
| Construction & materials | |
| Material Type | Cast iron |
| Included components | |
| Included Components | 1 mini metal lathe, 1 oil gun, 3 jaws, 9 cutters, 9 metal gears |
| Unit Count | 1 Count |
| Other details | |
| Chuck | 3-jaw |
| Tailstock | Adjustable |
| Safety | Emergency button |
| Handle Type | hand-tightened |
| Lock Type | Independent |
Closest rivals on specs
Laguna Revo 18/36 Lathe 2HP- Maximum Rotational Speed 2250 vs 1725 rpm (+30%)
WEN LA3421 Mini Benchtop Wood Lathe 8x13 in- Maximum Rotational Speed 2250 vs 3200 rpm (-30%)
WEN LA3424 5-Speed Benchtop Wood Lathe 12x18 in- Maximum Rotational Speed 2250 vs 3400 rpm (-34%)
Frequently asked questions
What taper and chuck does the VEVOR mini lathe use?
MT2 is the listed thread size, with a three-jaw chuck and a listed capacity of 3.9 inches.
What accessories come with the VEVOR mini lathe?
An oil gun, 3 jaws, 9 cutters and 9 metal gears, plus the lathe itself.
Does the VEVOR mini lathe run on household power?
The item highlight lists a 110V, 650W motor. Check the plug and circuit against the manual.