VEVOR Electric Hydraulic Rebar Bender 1500W
- 3/4 inch (20 mm, #6) rebar maximum
- 1500 W motor on 110 V AC power
- Electric hydraulic bending, portable
- 44.1 pounds, 24.8 x 6.69 x 7.87 inch
- Cast iron and aircraft aluminum body
Last refreshed Aug 4, 2026 · Based on the Amazon listing and published specifications, not hands-on testing.
A powered portable bender for rebar up to number six, suited to crews who shape bars on site. The listing is thin on bending angles and cycle speed, so check those before relying on it.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0DJP1PHL6Category: Cutting Tools
Overview
A hydraulic ram driven by a corded electric motor does the bending in this Vevor tool, so the operator guides the bar instead of levering it by hand. The body combines cast iron, aircraft aluminum and PVC, and the whole unit carries to the work area.
Powered bending takes the effort out of shaping reinforcing bar for footings, ties and cages, and the unit is light enough to carry between spots. Its bar range tops out at number six, and the listing gives no bend angle, die set or cycle time.
Who it's for
A small crew building rebar cages gets a faster result than a manual bender when many bars need the same bend. Heavy structural work, thick bar and off-grid sites call for a different machine.
Pros and cons
- Hydraulic power reduces hand effort
- Portable weight for a powered unit
- Handles up to number six rebar
- Cast iron and aluminum construction
- Corded AC power only
- Bend angle range not listed
- Included Rebar Binder entry is unclear
Performance notes
A hydraulic ram multiplies the motor output into a steady push, so bending force stays consistent from bar to bar. The largest bar size the head accepts is the hard limit, and a larger diameter needs more force than the listed motor can supply. Support the bar on both sides and keep the unit on a level surface, since the bend depends on holding the bar in line with the die.
Specifications
| Brand | Vevor |
|---|---|
| Dimensions & fit | |
| Item weight | 44.1 pounds |
| Dimensions | 24.8 x 6.69 x 7.87 inches |
| Size | 24.8 x 6.7 x 7.9 inches |
| Capacity & performance | |
| Wattage | 1500 watts |
| Power & efficiency | |
| Power Source | AC |
| Voltage | 110 volts |
| Construction & materials | |
| Color | Blue |
| Material | Cast iron, aircraft aluminum, PVC |
| Included components | |
| Included Components | Rebar binder x 1 |
| Other details | |
| Maximum rebar | 3/4 inch, 20 mm, number six |
| Item Model Number | RN-22 |
Frequently asked questions
How do I set up the Vevor electric hydraulic rebar bender?
The listing gives no setup steps or die instructions. It names a 110 volt AC supply, so plan on a nearby outlet or a generator that can handle 1500 watts.
What size rebar can the Vevor rebar bender handle?
The style line gives a maximum of 3/4 inch, which is 20 mm or number six. Anything larger is outside the stated range.
Is this a manual bender?
No. It is an electric hydraulic unit with a 1500 watt motor.
What is included with the Vevor rebar bender?
The listing names a rebar binder, quantity one, as the included component. Dies and accessories are not described.