O'SKOOL Straight Edge Clamp for Circular Saw 100"
- 100 inch total length, two 50 inch aluminum sections
- Aluminum body with TPR pads
- Quick clamp-on attachment to the workpiece
- 110 pounds tensile strength as listed
- 1-year warranty
Last refreshed Aug 4, 2026 · Based on the Amazon listing and published specifications, not hands-on testing.
A two-piece aluminum straight edge for guiding a circular saw along plywood and sheet goods, with quick clamps and grip pads. The listing does not explain how the two sections join, so check that before relying on the full length.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0DL9PM1LSModel: PGS004Category: Clamps
Overview
Not a saw or a track system with its own base, this is a pair of aluminum straight edges that clamp onto the workpiece so a circular saw shoe can ride along the edge. TPR pads grip the material, and the clamp-on design suits rip cuts and crosscuts.
A long, rigid edge turns a handheld circular saw into a tool that makes straight cuts across full sheets, and the clamps mean no screwing down to the material. The bright orange aluminum is easy to find on a crowded bench. The listing is short, so joining hardware and any cutting-width markings are unknown.
Who it's for
A cabinet maker or DIY builder who rips sheet goods on sawhorses gets a straight reference without a table saw. Buyers who want a plunge track system with an anti-chip strip, or a guide for other power tools, should shop for those directly.
Pros and cons
- Long reach for full sheet cuts
- Aluminum body stays light
- TPR pads grip the workpiece
- Clamps on without screws
- Joining method for sections unclear
- Not a track with a saw base
- Tensile rating of little use for cutting
Performance notes
The saw shoe rides against the aluminum edge, so cut accuracy depends on how straight the edge is and how firmly the clamps hold it. TPR pads resist slipping on veneer faces, but the clamping force on the far end still limits how rigid a long edge feels. Offsetting the edge by the distance from blade to shoe edge sets where the cut lands, and that offset must be measured on your own saw.
Specifications
| Brand | O'SKOOL |
|---|---|
| Model | PGS004 |
| Dimensions & fit | |
| Item dimensions | 55.91 x 2.99 x 1.57 inches |
| Size | 100 inch straight edge clamp |
| Construction & materials | |
| Material Type | Aluminum |
| Color | Orange |
| Compatibility & installation | |
| Mounting Type | Quick clamp-on with TPR pads |
| Included components | |
| Number Of Packs | 1 |
| Included Components | Pack |
| Warranty & support | |
| Manufacturer Warranty Description | 1-year warranty |
| Other details | |
| Tensile Strength | 110 pounds |
| Item Highlight | Plywood and sheet goods, rip cuts, crosscuts |
Frequently asked questions
What comes in the O'SKOOL 100 inch straight edge clamp pack?
The listing says one pack made of two 50 inch aluminum sections with quick clamp-on attachment and TPR pads. It does not name any extra hardware, joiners or carrying case.
Is the O'SKOOL straight edge a track saw rail?
No. It is a clamp-on straight edge for a circular saw, with no saw base or plunge track included.
What can I cut with the O'SKOOL straight edge clamp?
The listing points to plywood and sheet goods, for rip cuts and crosscuts with a circular saw.
Why does the listing show 55.91 inches if the product is 100 inches?
The item dimensions line gives 55.91 x 2.99 x 1.57 inches, while the title and highlight describe two 50 inch sections. The listing does not explain the difference, so confirm the assembled length with the seller.