VEVOR Underhoist Support Stand US076
- 3/4 ton, 1653.5 lb Load capacity listed for the support stand
- 38.4 to 75.4 inch height Screw adjustment with a bearing-mounted spin handle
- Self-locking threaded screw Supports precise positioning under a lift
- Dual wheels Rolls under the vehicle for component service
- 24.9 lb, Q235B steel Measures 39.37 x 14.17 x 14.17 inches
Updated 23 days ago · Based on the Amazon listing and published specifications, not hands-on testing.
A tall, screw-adjusted support stand meant for use under a vehicle lift when components are removed. It is a specialty shop item rather than a conventional jack stand, and its lifting range starts high.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0DXTLWZL4Model: US076
Overview
Wheels carry this support into place, and a spin handle on a self-locking threaded screw does the raising. It is meant for use beneath a lifted vehicle while a component such as an axle or transmission is serviced.
Its strength is fine positioning: the screw lets you creep up to a part in small steps, and the rolling base moves it into place. The limitation is height. Even its lowest setting is far above floor level, so it does not replace a regular stand, and the listing leaves out the saddle and base details.
Who it's for
Shop technicians and serious home mechanics who work on a two-post lift. Someone who only changes wheels at ground level needs an ordinary stand instead.
Pros and cons
- Fine height control with a screw
- Rolling base eases positioning
- Self-locking thread holds position
- Hardware and bearing included
- Minimum height is very high
- Saddle details not published
- Capacity is under one ton
- Vehicle fit listed vaguely
Performance notes
The threaded screw advances in small increments as the handle turns, and self-locking means the load does not back it down. A bearing at the handle cuts friction while loaded. Stability depends on keeping the load centered on the saddle and the base level.
Specifications
| Brand | VEVOR |
|---|---|
| Model | US076 |
| Dimensions & fit | |
| Item Weight | 24.9 pounds |
| Maximum Lifting Height | 75.4 inches |
| Minimum Height | 38.4 inches |
| Construction & materials | |
| Color | Orange |
| Material Type | Q235B |
| Compatibility & installation | |
| Compatible With Vehicle Type | Car |
| Included components | |
| Number Of Packs | 1 |
| Other details | |
| Automotive Fit Type | Vehicle Specific Fit |
| Style Name | Screw |
Frequently asked questions
Is the Vevor underhoist stand a regular jack stand?
No. It is a wheeled screw support, made for servicing parts under a raised vehicle.
How low does it go?
Its starting height is well over three feet, so it is not for ground-level work.
How does the height adjust?
With a hand crank connected to a screw drive.
What hardware comes with it?
A bearing, nuts and several bolts are listed.