CT Sounds Dual 12” 2600W Complete Bass Package with Loaded Subwoofer Box and Amplifier
- Dual 12 inch subwoofers, 2600 W max power
- 1500 W RMS CT-1500.1D monoblock amplifier
- 2.40 ft³ net volume, tuned to 33 Hz, kerf port
- 4 gauge OFC amplifier wiring kit
- RCA input, mono output
- 16.85"D x 35.5"W x 14.8"H MDF enclosure
- 1 year manufacturer warranty
Last refreshed Oct 2, 2026 · Based on the Amazon listing and published specifications, not hands-on testing.
Two loaded subs, an amplifier and wiring arrive together, so it suits drivers who want a ready system. The enclosure is wide and nothing about it is waterproof.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0F15SXQL3Model: TROPO-2X12D4Category: Enclosed Subwoofer Systems
Sizes Available
Need a different one? Pick on Amazon →
Overview
Not a bare driver or an empty box, this is a complete bass package with two subwoofers pre-installed in a ported enclosure, plus an amplifier and a wiring kit. The drivers are mounted flush into the front baffle for an air-tight seal.
Everything needed to add bass arrives together: subwoofers, enclosure, amplifier and wiring. That removes the work of matching parts. The limitation is footprint and scope, since the box is wide and the package is for car audio only, with impedance and subwoofer power handling beyond the headline figures left out.
Who it's for
Drivers adding serious bass to a car stereo with RCA outputs get a matched set here. Anyone short on cargo width, or who wants stereo amplification or marine use, should look at other systems.
Pros and cons
- Complete plug-and-play package
- Subs pre-mounted in ported box
- Monoblock amplifier included
- Wiring kit supplied
- Wide enclosure needs cargo space
- Mono output only
- Impedance not listed
Performance notes
Bass output is set by the enclosure volume, the port tuning and the amplifier power feeding the drivers. The kerf port extends low frequency output around the tuning point, and the air-tight flush mounting prevents leaks that blur bass. The package pairs the amplifier with the subs, so the power match is already made.
Specifications
| Brand | Sounds |
|---|---|
| Model | TROPO-2X12D4 |
| Dimensions & fit | |
| Subwoofer diameter | 12 inches |
| Dimensions (D x W x H) | 16.85"D x 35.5"W x 14.8"H |
| Capacity & performance | |
| Maximum power | 2600 watts |
| Net volume | 2.40 ft³ |
| Output mode | Mono |
| Final Impedance Of Loaded Enclosure | Pre-Wired To 1 Ohm |
| Loaded Enclosure Power Rating | 1300 Watts RMS |
| Power & efficiency | |
| Amplifier Power Rating | 1500 Watts RMS at 1 Ohm |
| Construction & materials | |
| Enclosure | MDF wood |
| Compatibility & installation | |
| Mounting | Flush Mount |
| Connectivity | RCA |
| Warranty & support | |
| Warranty | 1-year manufacturer warranty |
| Other details | |
| Subwoofers | 2 |
| Amplifier | CT-1500.1D, 1500-watt RMS monoblock |
| Tuning frequency | 33 Hz |
| Port design | Kerf port |
| Wiring kit | AMPKIT-4GA-ELITE 4 gauge OFC |
| Waterproof | No |
Frequently asked questions
What comes in the CT Sounds TROPO-2X12D4 bass package?
The listing shows a TROPO-2X12D4 loaded enclosure with two TROPO-12-D4 subwoofers, a CT-1500.1D monoblock amplifier and an AMPKIT-4GA-ELITE 4 gauge OFC wiring kit.
Is the CT Sounds TROPO-2X12D4 waterproof?
No. The listing marks it as not waterproof and for car audio use.
Do I need a separate amplifier for the TROPO-2X12D4?
No. The package includes the CT-1500.1D monoblock amplifier, described as a plug-and-play system.