VEVOR Sway Control Weight Distribution Hitch
- 1,500 lb weight distribution capacity
- 2 inch steel shank
- 2-5/16 inch ball, alloy steel
- 6.8 tons maximum towing capacity
- Powder coated black finish
- Bolt kit and pin kit included
- 84 lb item weight
Last refreshed Oct 2, 2026 · Based on the Amazon listing and published specifications, not hands-on testing.
A universal sway control weight distribution hitch kit with a heavy steel shank and ball. The listing states its capacity two ways, so check the rating against your tongue weight before buying.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0F21W82JQModel: HL10000Category: Weight Distributing Hitches
Overview
Hooking a trailer to this VEVOR weight distribution hitch adds load leveling and sway control to an RV or trailer setup. It uses a steel shank and an alloy steel ball, finished in black powder coat.
A complete kit with bolts and pins, in a universal fit for RVs and trailers, is what stands out. The limitation is clarity: capacity appears as a pull force and again as a towing capacity in tons, and the listing gives no warranty or tongue weight range.
Who it's for
Trailer owners wanting level towing and less sway, and willing to check receiver and coupler sizes, are the audience. Anyone needing documented tongue weight limits, or a different ball size, should look at another hitch.
Pros and cons
- Sway control and load leveling
- Alloy steel ball
- Bolt and pin kit included
- Powder coated finish
- Capacity stated two different ways
- No manufacturer warranty listed
- Tongue weight range unstated
- Heavy to install
Performance notes
A weight distribution hitch shifts part of the trailer tongue load back onto the tow vehicle axles and the trailer axles, and the sway control resists side-to-side movement. The listing gives the shank and ball sizes but no spring bar rating, so setup depends on following the maker manual.
Specifications
| Brand | VEVOR |
|---|---|
| Model | HL10000 |
| Dimensions & fit | |
| Shank | 2 inch |
| Ball | 2-5/16 inch |
| Item weight | 84 pounds |
| Capacity & performance | |
| Maximum towing | 6.8 tons |
| Construction & materials | |
| Material | 40Cr, 42CrMoA, Q355B, solid |
| Finish | Powder Coated |
| Compatibility & installation | |
| Vehicle type | RV, Trailer |
| Included components | |
| Included | 1 x Bolts Kit, 1 x Pin Kit, 1 x Weight Distribution Hitch |
| Other details | |
| Pull force | 1500 pounds |
| Fit type | Universal Fit |
Frequently asked questions
What trailers and vehicles is the VEVOR HL10000 compatible with?
The listing says universal fit for RVs and trailers. Check that your receiver matches the 2 inch shank and that the trailer coupler takes a 2-5/16 inch ball, because no tongue weight rating is given.
What is in the box with the VEVOR HL10000 hitch?
The listing shows one weight distribution hitch, one bolt kit and one pin kit.
Why does the VEVOR HL10000 list two capacity figures?
The listing gives 1,500 pounds as pull force and 6.8 tons as maximum towing capacity without explaining the difference. Check the maker manual before relying on either.