VEVOR Ducted Fume Hood
- 22.83 x 25.98 x 24.80 inch working area
- Ducted exhaust
- 150 watts at 110 volts
- 65 db noise level
- Adjustable speed, knob control
- G1 pre-filter, mesh and grease filter
- 127.9 pounds, 29.13 x 25.59 x 40.94 inch body
Updated 2 days ago · Based on the Amazon listing and published specifications, not hands-on testing.
A ducted lab fume hood for a bench or workshop that needs an exhaust line and adjustable fan speed. The listing gives no duct size or airflow figure, and its mounting wording is inconsistent.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0G3NFPC38Model: CB.V.Q10.D12.N.00052Category: Fume Hoods
Sizes Available
Need a different one? Pick on Amazon →
Overview
A laboratory owner, school or workshop setting up fume control gets a steel hood with a powder coated finish, an LED light and a filter in the box. A knob adjusts fan speed, and the exhaust is ducted out rather than recirculated. The listing describes it as freestanding and as built-in.
The reason to buy is a bundled filter set and light with adjustable speed in one steel housing. The limit is information: duct diameter, airflow and any safety certification are not listed, and the hood has to be connected to an exhaust path.
Who it's for
A small laboratory or teaching bench with a duct route and a standard outlet fits the stated setup. A buyer who must meet a specific safety standard should confirm certification, because none is listed.
Pros and cons
- Adjustable fan speed
- LED light included
- Pre-filter and grease filter included
- Powder coated steel build
- Duct size not listed
- Airflow not listed
- Mounting wording is inconsistent
- Safety certification not listed
Performance notes
The fan draws air across the working area and out through the duct, and the speed knob changes how hard it pulls. A pre-filter and mesh filter catch particles and grease before the air reaches the fan. Real capture depends on the duct run and its length, which the listing does not describe.
Specifications
| Brand | VEVOR |
|---|---|
| Model | CB.V.Q10.D12.N.00052 |
| Dimensions & fit | |
| Dimensions (D x W x H) | 29.13"D x 25.59"W x 40.94"H |
| Item Weight | 127.9 pounds |
| Capacity & performance | |
| Power | 150 watts |
| Noise | 65 db |
| Power & efficiency | |
| Power | 110 volts |
| Construction & materials | |
| Material | Stainless steel |
| Finish | Powder coated, white |
| Other details | |
| Light | LED |
| Ventilation | Ducted |
| Fan Speeds | Knob, adjustable speed |
| Filtration | G1 pre-filter, mesh, grease filter |
| Working Area | 22.83 x 25.98 x 24.80 inches |
Frequently asked questions
How is the VEVOR ducted fume hood installed?
It is ducted, so it must connect to an exhaust path. The listing gives no duct diameter or install guide, and it labels the mounting as both built-in and freestanding.
Does the VEVOR fume hood include a filter?
Yes. A filter is listed as included, and the title mentions a G1 pre-filter.
Can the VEVOR fume hood recirculate air?
No. The ventilation type is ducted, so it exhausts through a duct.
How loud is the VEVOR ducted fume hood?
The noise level is listed as 65 db.