VictOptics S6 1-6x24 LPVO SFP Rifle Scope
- 1 to 6x, 24 millimeter objective
- Mil Dot reticle, 0.25 mils sight pin size
- 1.93 inch (49 mm) center height, 1-piece Picatinny mount
- 1.3 pounds, aluminum body
- Eye relief 101, field of view 109.2 as listed, no units given
- 1 year manufacturer warranty
Updated 23 days ago · Based on the Amazon listing and published specifications, not hands-on testing.
A low power variable optic sold with its high one-piece mount and a throw lever. Two key measurements come with no units attached.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0GLDZH5D4Model: S6Category: Rifle Scopes
Overview
A one-piece Picatinny mount sets the optic height for the VictOptics S6, which the description ties to a stated center height. The scope is a variable-power LPVO in aluminum with a Mil Dot reticle, supplied with flip-up caps and a power throw lever.
The reason to look is a complete package: scope, high mount, lens caps, a throw lever and a plastic wrench. The limit is clarity on measurements, since eye relief and field of view carry no units and the compatible device list is broad.
Who it's for
Hunters and airsoft players with a Picatinny rail who want a low-end wide view and a ready mount will find the kit complete. Shooters who need a tube diameter, parallax setting or turret details should look for a listing that states them.
Pros and cons
- Mount kit included
- Mil Dot reticle
- Power throw lever included
- Flip-up caps included
- Eye relief and field of view lack units
- Tube diameter absent
- Broad device claim, no recoil rating
Performance notes
A zoom range from one to six covers close targets at the low end and moderate reach at the high end, while the small objective diameter limits light gathering at dusk. The Mil Dot reticle is the aiming pattern, with a stated sight pin size, and the included throw lever is there to speed magnification changes. Mount height decides how the shooter's eye lines up with the optic.
Specifications
| Brand | Victoptics |
|---|---|
| Model | S6 |
| Dimensions & fit | |
| Objective Lens Diameter | 24 millimeterslower than 89% of 246 rifle scopes |
| Item Display Weight | 1.3 pounds |
| Item Dimensions L X W X H | 9.8 x 2.5 x 2.55 inches |
| Aiming Scope Sight Pin Size | 0.25 mils |
| Construction & materials | |
| Material Type | Aluminum |
| Color | Matte black |
| Compatibility & installation | |
| Mounting Type | Picatinny mount, 1.93 inch center height |
| Compatible Devices | Air gun, airsoft rifle, rifle, shotgun |
| Included components | |
| Included Components | 1-6x24 scope, flip-up caps, honeycomb, power throw lever, plastic wrench |
| Warranty & support | |
| Warranty Description | 1 year manufacturer |
| Other details | |
| Magnification Minimum | 1x |
| Magnification Maximum | 6x |
| Reticle Type | Mil Dot |
| Field Of View | 109.2 (no unit listed) |
| Eye relief | 101 (no unit listed) |
Closest rivals on specs
Frequently asked questions
How large is the VictOptics S6 scope?
The listed dimensions are 9.8 x 2.5 x 2.55 inches, and the weight is 1.3 pounds. The listing does not give a tube diameter.
What comes with the VictOptics S6?
The included components list the 1-6x24 scope, flip-up caps, honeycomb, a power throw lever and a plastic wrench. The description adds the one-piece Picatinny mount.
Is the VictOptics S6 a first focal plane scope?
The title says SFP, and the reticle type is listed as Mil Dot. The listing does not define SFP further.
What is the mount height on the VictOptics S6?
The description gives a center height of 1.93 inches, or 49 mm, for the one-piece Picatinny mount.