Hisense 50-Pint Portable Dehumidifier with Built-In Pump
- 50 pints per day dehumidification capacity
- 4,500 sq ft floor area covered
- Built-in pump with quick-connect hose included
- Runs down to 38°F, for basements and crawl spaces
- 3 fan speeds, Auto, Continuous and Manual modes
- 40.3 lb, 10.7 x 15.1 x 24.8 inch footprint
Updated 23 days ago · Based on the Amazon listing and published specifications, not hands-on testing.
A pump-equipped dehumidifier for damp basements and garages that spares you the bucket hauling. The pumped route only works when a drain point is within reach of the hose.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B0GWFVLJF3Model: ADH50KP26
Overview
A basement owner tired of emptying a heavy bucket gets a dehumidifier that pushes water out through a built-in pump. A quick-connect hose carries the water out to a drain point, and a bucket full indicator warns when the tank is used instead. Three operating modes cover automatic, nonstop and manual control.
Pumped drainage suits unattended runs in a lower level, where a floor drain may not exist. Low-temperature operation widens where it can work. The limitation is hose length: the listing does not state how far or how high the pump can lift water.
Who it's for
A lower level with persistent moisture, where nobody wants to carry a full tank up the stairs, suits this model. Someone with only a tiny closet to treat, or no place to run the hose, would be carrying a large unit for little reason.
Pros and cons
- Built-in pump drains without emptying a bucket
- Quick-connect hose included
- Works in cool spaces like crawl spaces
- Three fan speeds adjust noise and airflow
- Pump lift height not listed
- Large footprint for a small room
- Needs a sink or window for pumped drainage
Performance notes
Moisture removal depends on the unit pulling air across a cold coil, so capacity per day and the room area decide how fast humidity falls. Auto mode cycles with ambient humidity, while Continuous mode runs without stopping for persistent damp. The pump moves collected water out through the hose, which lets a long run finish without a full tank shutting it down.
Specifications
| Brand | Hisense |
|---|---|
| Model | ADH50KP26 |
| Dimensions & fit | |
| Item Dimensions D X W X H | 10.7"D x 15.1"W x 24.8"H |
| Capacity & performance | |
| Capacity | 50 pints |
| Number Of Speeds | 3 |
| Power & efficiency | |
| Voltage | 115 volts |
| Construction & materials | |
| Color | Black |
| Material | Metal, Plastic |
| Included components | |
| Included Components | Dehumidifier, Manual, Warranty |
| Unit Count | 1 Count |
| Warranty & support | |
| Warranty Description | 2 Year Limited |
| Other details | |
| Floor Area | 4500 square_feet |
| Operation Mode | Continuous |
| Recommended Uses For Product | Residential |
Frequently asked questions
How do I drain the Hisense ADH50KP26 without emptying the tank?
Connect the included quick-connect hose to the built-in pump and route it to a sink or a basement window for continuous, unattended drainage.
Does the Hisense 50-pint dehumidifier work in a cold basement?
Yes. The listing states operation down to 38°F, which covers basements, crawl spaces and garages where humidity lingers.
What happens if I do not use the pump hose?
Water collects in the tank, and a bucket full indicator alerts you so it does not overflow.
Is this dehumidifier meant for commercial spaces?
No. The spec sheet lists residential use, and it runs on 115 volts household power.