US
Toggler

TOGGLER Toggle TB Drywall Anchor with Screws

  • Drywall Anchor
  • Hollow
  • PP (Polypropylene)
  • 20
4.6/ 5 on Amazon1,000Amazon ratings2,000+bought last month
High confidenceUpdated 8 days agoAmazon data + ProductDome analysis · methodology
Best forYou're mounting something heavier than a standard plastic anchor can handle, like a closet system, curtain track, or large mirror, without a stud

A stronger option than a standard plastic wall anchor for genuinely heavy items, at the cost of a slightly fussier install and a bigger hole if the fixture ever comes down.

View current price on Amazon →

As an Amazon Associate, ProductDome may earn a commission from qualifying purchases made through links on this page.

Overview

The TOGGLER Toggle TB is a polypropylene drywall anchor sold as a 20 pack with number 8 by 1-1/2 inch screws included, sized for 3/8 to 1/2 inch drywall and rated for number 6 through number 14 fasteners.

Unlike a simple push-in plastic anchor, this one is designed to affix to the back of the drywall before the bolt and fixture go on, which is what lets one person set it and attach a fixture without holding anything in place from both sides. TOGGLER lists a tensile rating of 143 pounds in 1/2 inch drywall with the included screw, but its own guidance is to use no more than about a quarter of that figure as a safe working load, which is the number that actually matters for what you hang on it.

  • Rated 143 lb tensile in 1/2 inch drywall with the included screw
  • Fits 3/8 to 1/2 inch drywall thickness
  • Anchor affixes before the fixture, for one person installs
  • Made in USA, 20 pack with #8 x 1-1/2 inch screws included

Who it's for

Good for heavier wall-mounted items, closet organizer systems, curtain tracks, larger mirrors, or TVs, going into standard drywall where a stud isn't available. Less suited to anyone who wants to swap out the fixture later without patching, since removing the anchor leaves a noticeably larger hole than a plastic push-in type.

What buyers say

From Amazon customer reviews.

Reviewers who used these for heavier jobs, closet organizer systems, ceiling curtain tracks, and wall mirrors, report they hold firmly with no spinning or pulling loose over time, and one mentions professional installers using the same anchors for large wall-mounted TVs. The most common complaint is the setting process: the supplied red plastic tool doesn't reliably pop the anchor's legs into place for everyone, with a couple of reviewers switching to a hammer tap or an improvised tool instead. Reviewers also note that removing one leaves a larger hole to patch than a standard push-in anchor, so they reserve these for fixtures they don't plan to change.

Strengths and trade-offs

Drawn from this product's published specifications.

What stands out
  • Holds heavy items like closet systems, curtain tracks, and large mirrors
  • Anchor sets before the fixture, allowing a one person install
  • Polypropylene body doesn't crack during installation
  • Made in USA, screws included and sized to fit
What to check first
  • Setting the legs can be fiddly; some reviewers bypass the included tool
  • Removing the anchor leaves a larger hole than a standard plastic anchor
  • Rated tensile strength is well above the recommended safe working load

Performance notes

The anchor's legs spread open behind the drywall once set, distributing the load across the back of the panel rather than relying on the drywall's face alone. Several reviewers found the included red plastic setting tool inconsistent and instead tapped it into place with a hammer or used an improvised tool, like a drill bit held in vice grips, to get the legs to pop fully open.

Specifications

BrandToggler
Model45220
Dimensions & fit
Compatible Groove Diameter0.2 inches
Item Diameter0.3 inches
Item Dimensions2 × 4 × 10 inches
Outside Diameter0.3 inches
Size Name20 Pack w/ Screws
Thread Size#6 to #14
Construction & materials
Material TypePP (Polypropylene)
ColorOriginal Version
Finish TypesPlastic
Included components
Number of Pieces20
Unit Count20
Included ComponentsAnchors & Screws
Other details
Fastener TypeHollow
Number Of Items20
Item HighlightPolypropylene drywall anchors with screws for #6 to #14 fasteners
Set Name20 Pack w/ Screws
Grade RatingResidential
Item ShapeCylindrical
Maximum Shear Strength50-150 pounds
Part Number50525
Screw Head StyleToggler

How it compares

This product against the closest alternatives we track in drywall anchors.

ProductAmazon ratingRatingsProductDome score
TOGGLER Toggle TB Drywall Anchor with ScrewsThis product4.6 / 51,000 -
E-Z Ancor 25310#8 x 1-1/4" 50 Count 75lb Self-Drilling Twist-N-Lock Drywall AnchorAncor4.7 / 52,5004.6 / 5
KURUI Drywall Anchors and Screws Assortment KitKurui4.6 / 55,1004.5 / 5
Qualihome Drywall Anchors with ScrewsQualihome4.4 / 56,6004.3 / 5
Gripit Blue Drywall AnchorsGripit4.3 / 510,2004.2 / 5
Frequently asked

Questions about the Toggler 45220

Common buyer questions answered straight from the product spec data - no fluff, no "it depends".

What size drywall does the TOGGLER Toggle TB fit?

It is designed for 3/8 inch to 1/2 inch thick drywall.

What screws come with the Toggle TB?

It includes #8 x 1-1/2 inch screws, and the anchor is rated for #6 through #14 fasteners generally.

How much weight can the Toggle TB hold?

TOGGLER rates it at 143 lb tensile strength in 1/2 inch drywall with the included screw, but recommends using no more than about a quarter of that figure as a safe working load.