JET Oscillating Spindle Sander 1 HP
- 1 HP, 115 V single phase, 15 A, 1720 rpm
- 216 lb floor-mount machine, 24.5 x 24.5 x 44.25 inches
- Six spindles and five rubber drums, with sleeves
- Six table inserts and two wrenches supplied
- 5 year warranty, 2 years if used commercially
Last refreshed Aug 4, 2026 · Based on the Amazon listing and published specifications, not hands-on testing.
A floor-standing oscillating spindle sander with a full set of spindles, drums and inserts, for a shop doing curved edge work. It is heavy and needs a dedicated spot and a matching circuit.
As an Amazon Associate I earn from qualifying purchases. ProductDome earns a commission when you buy through links on this page.
ASIN: B00XRNBYNOCategory: Sanders
Overview
A woodworker shaping curves gets this JET spindle sander, which spins and oscillates a spindle up and down so the sanding sleeve wears evenly. The machine stands on the floor, and a stack of sleeves and inserts covers different radii.
A full accessory set means most curve sizes are covered from the first day, and the machine has a motor sized for shop use. The limit is size: it weighs a considerable amount, takes floor space, and the listing gives no table size or oscillation stroke.
Who it's for
Cabinet makers, furniture builders and small production shops that smooth inside and outside curves all day will use the full spindle range. A weekend woodworker with a small garage, or someone who must move the tool often, should consider a smaller benchtop model.
Pros and cons
- Full set of spindles and drums included
- Floor-standing machine absorbs vibration
- Longer warranty for non-commercial use
- Runs on common single phase power
- Very heavy, needs permanent placement
- Table size not listed
- Oscillation stroke not listed
Performance notes
Spindle speed and the up-and-down oscillation decide how evenly the sleeve wears and how smooth the curve comes out. A heavy base absorbs the vibration that a lighter machine would pass into the workpiece. Dust collection performance is not described in the listing, so plan for extraction separately.
Specifications
| Brand | JET |
|---|---|
| Dimensions & fit | |
| Disc Diameter | 4 incheslower than 69% of 50 sanders |
| Item dimensions | 24.5 x 24.5 x 44.25 inches |
| Item weight | 216 pounds |
| Item Dimensions L X W X H | 24.5"L x 24.5"W x 44.25"H |
| Capacity & performance | |
| Maximum Rotational Speed | 1720 rpmlower than 90% of 111 sanders |
| Amperage Capacity | 15 A |
| Power & efficiency | |
| Power Source | Corded electric |
| Voltage | 115 volts, single phaselower than 61% of 113 sanders |
| Motor | 1 hp |
| Included components | |
| Included Components | Sander, 6 spindles with sleeves, 5 rubber drums with sleeves, 6 table inserts, 2 wrenches |
| Unit Count | 1 Count |
| Warranty & support | |
| Manufacturer Warranty Description | 5 year, 2 year if used commercially |
| Other details | |
| Grit Number | 100 |
| Grit Type | Medium |
| Item Type Name | Floor Mount Oscillating Spindle Sander |
Closest rivals on specs
Frequently asked questions
How do I install the JET JOSS-S?
It is a floor-mount machine weighing 216 pounds, so plan a permanent spot and help with the lift. The listing gives no assembly steps, so follow the manual.
What comes with the JET JOSS-S?
The listing names six spindles with sleeves, five rubber drums with sleeves, six table inserts and two wrenches.
What power does the JOSS-S need?
The listing gives 115 volts, single phase, 15 A and a 1 HP motor.
Does the warranty change for shop use?
Yes. The listing says five years, but commercial or industrial use defaults to two years.